| Model | KV-XH16ML |
| Type | Positioning/motion unit |
| No. of control axes | 16 axes (total including virtual axes) |
| Appropriated device | Relay: 2112 points (132 channels) Data memory: 4 words |
| Output format | MECHATROLINK-III |
| Connectable CPU unit | KV-8000A |
| Max. number of connectable units | 7 |
| Refresh | Automatic refresh, direct refresh, synchronous refresh between units |
| Control mode | Positioning control, Torque control, Speed control, ML-III command, I/O control |
| Control period | 62.5 μs or more (With SV2 Series: 125 μs or more) |
| Starting time | 125 μs |
| Axis control function execution method | Ladder program, unit program (flow, C language) |
| Unit program capacity | 3 MB (Max. number of blocks: 20000) |
| Block type (Flow) | Positioning control block, synchronization control block, speed control block, torque control block, origin return block, current coordinate change block, speed change block, target coordinate change block, continuous positioning start block, “continuous-point number block” continuous–independent/linear interpolation block, continuous–arc interpolation block, continuous positioning complete standby block, calculation block, standby block, program execute block, program stop/restart block, force close program block, unit interrupt block, cam data read/write block, selection branch block, parallel branch block, merge block, GOTO block, start block, end block |
| Max. number of flows | 256 |
| Number of simultaneous activities (Flow) | No upper limit |
| Internal data Memory (Flow) | 524288 words |
| Position unit | mm, inch, deg (angle), PLS (number of pulses) Decimal point position from 0 to 9 digits, unit conversion function available |
| Cumulative address | -2147483648 to +2147483647 specification units |
| Positioning mode | Absolute value/relative value |
| Position setting range | -2147483648 to +2147483647 specification units |
| Interpolation | Linear interpolation, arc interpolation, helical interpolation |
| Single operation address | -2147483648 to +2147483647 specification units |
| Acceleration/deceleration curve | Linear, SIN |
| Acceleration/deceleration time | 0 to 65535 ms |
| M-code | 1 to 65000, WITH/AFTER mode |
| Sensor positioning | External input-based switching control from speed to position |
| Number of points (Positioning control) | 100 points/axis (Trajectory control at 100 points or more possible with flows) |
| Special function (Positioning control) | Synchronous tracking control, absolute position tracking control |
| Input (Synchronization control) | External reference, instruction coordinates, current coordinates |
| Input filter (Synchronization control) | Interference prevention function |
| Clutch (Synchronization control) | Select from direct, slide, and follow-up |
| Cam (Synchronization control) | Resolution: 2048 to 32768 Data points: 4 to 64 (changes according to the resolution) |
| Compensation during operation (Synchronization control) | Compensation via auxiliary input, phase compensation, and step angle compensation |
| Origin return method | Data set type, dog type (push), dog type (selectable from “with Z phase” or “without Z phase”), dog type sizing (selectable from “with Z phase” or “without Z phase”), immediate Z phase, origin sensor and Z phase, rising edge of limit switch, origin sensor midpoint/rising edge |
| JOG/inching | JOG (high speed/low speed), inching (specifiable pulses) |
| Teaching | Current coordinate teaching |
| Memory data | Point parameters (each axis), synchronization parameters (each axis), cam data, unit program, servo parameters, setting read/write during RUN (with some restrictions) |
| Output display | LINK, CONNECT, error status |
| Self-diagnosis function | Diagnosis can be made through hardware errors, various parameter errors, error numbers, and error messages |
| Parameter setting | Parameters can be set from KV STUDIO, ladder programs, and unit programs (flow) |
| Data backup | Coordinates: nonvolatile memory backup (unlimited) Parameter settings: flash ROM backup (20000 switches) |
| Internal current consumption | 400 mA or less |
| Weight | Approx. 280 g |
Module truyền động Keyence KV-XH16ML 16 vị trí
Positioning/Motion Unit 16-axis
SKU: KV-XH16ML
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT
CHÍNH SÁCH BẢO HÀNH
- Thời gian nhận bảo hành
Thứ 2 đến thứ 6 hàng tuần: 8h00-17h30
Trừ ngày lễ và chủ nhật - Địa điểm bảo hành
Khi cần bảo hành sản phẩm hãy liên hệ với chúng tôi sớm nhất, chúng tôi sẽ có trách nhiệm hỗ trợ các bạn bảo hành sản phẩm tại hãng sản xuất.
Địa điểm nhận bảo hành:
Người liên hệ: - Điều kiện bảo hành
Sản phẩm được bán tại dientudonghoadonga.com là sản phẩm chính hãng và được hưởng chế độ bảo hành chính hãng tại Việt Nam. Do tính chất phức tạp của các loại thiết bị điện nên tùy theo từng nhà sản xuất và từng chủng loại sản phẩm mà chế độ bảo hành sẽ khác nhau, vui lòng tham khảo điều khoản cụ thể bên dưới.
Trường hợp được bảo hành:
Bảo hành sản phẩm là: khắc phục những lỗi hỏng hóc, sự cố kỹ thuật xảy ra do lỗi của nhà sản xuất
Sản phẩm còn trong thời hạn bảo hành theo quy định của từng hãng sản xuất và từng thiết bị
Có Phiếu bảo hành/tem niêm phong của nhà sản xuất hoặc nhà phân phối
Có Hóa đơn mua hàng của dientudonghoadonga.com
Sản phẩm bảo hành sẽ tuân theo qui định bảo hành của từng nhà sản xuất đối với các sự cố về mặt kỹ thuật
Lưu ý:
Khách hàng chịu trách nhiệm cho chi phí vận chuyển nếu có phát sinh.
Hết thời hạn bảo hành,chi phí sửa chữa sẽ được trung tâm bảo hành hỗ trợ với giá ưu đãi nhất.
Trường hợp không được bảo hành:
Sản phẩm đã quá thời hạn bảo hành ghi trên phiếu Bảo hành/tem niêm phong hoặc mất Phiếu Bảo hành (nếu có).
Những sản phẩm không thể xác định được nguồn gốc mua tại dientudonghoadonga.com thì chúng tôi có quyền từ chối bảo hành.
Mất hóa đơn
Tem niêm phong bảo hành bị rách, vỡ, hoặc bị sửa đổi
Phiếu bảo hành (nếu có) không ghi rõ số Serial và ngày mua hàng
Số serial trên sản phẩm và Phiếu bảo hành không trùng khớp nhau hoặc – không xác định được vì bất kỳ lý do nào
Số serial trên sản phẩm không xác định được
Sản phẩm bị hư hỏng do sử dụng không đúng kỹ thuật theo hướng dẫn của nhà sản xuất.
Sản phẩm bị hư hỏng do tác động cơ học làm rơi, vỡ, va đập, trầy xước, móp méo, ẩm ướt, hoen rỉ, thấm nước.
Sản phẩm có dấu hiệu hư hỏng do chuột bọ hoặc côn trùng xâm nhập hoặc do hỏa hoạn, thiên tai gây nên
Tự ý tháo dỡ, sửa chữa bởi các cá nhân hoặc kỹ thuật viên không được sự ủy quyền của Codienhaiau.com
Quý khách muốn thay đổi chủng loại, mẫu mã sản phẩm.
Chúng tôi rất quan tâm đến quyền lợi của Quý khách hàng, trong trường hợp bạn có góp ý, thắc mắc liên quan đến chính sách của chúng tôi, vui lòng liên hệ:
| Thông tin công ty | |
| Địa chỉ | |
| Điện thoại | |
| Giờ làm việc | Từ 8h00am – 17h30pm ( Thứ 2 đến thứ 6) |
Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao tận tay khách hàng
Mở hộp kiểm tra nhận hàng
Hỗ trợ 24/7
Đổi trả trong 7 ngày

Rơ leTimer Omron H3CR-A AC24-48/DC12-48 